AWS weld symbols, joint types, positions, preheat, heat affected zone and visual and NDT inspection.
40 cards · basic cards · AI-written, checked twice. Edit anything.
- What does a fillet weld symbol look like?
Show answer
A right triangle at the symbol line- What does a groove weld symbol look like?
Show answer
Varies: V, bevel, U, J, or flare based on joint prep- What does a symbol on the line below the reference line mean?
Show answer
The weld is on the near side- What does a symbol on the line above the reference line mean?
Show answer
The weld is on the far side- What does a backing bar symbol represent?
Show answer
Material placed behind the joint to support molten metal- What is a butt joint?
Show answer
Two members positioned end to end with edges aligned- What is a lap joint?
Show answer
Two overlapping members with surfaces parallel- What is a tee joint?
Show answer
Two members positioned perpendicular to each other- What is a corner joint?
Show answer
Two members at a right angle with edges aligned- What is an edge joint?
Show answer
Two members in the same plane with edges adjacent- What is a fillet weld?
Show answer
A triangular weld deposited in the corner where two surfaces meet- What is a groove weld?
Show answer
A weld made in the groove between two prepared members- What position is 1F?
Show answer
Flat position for fillet welding- What position is 2F?
Show answer
Horizontal position for fillet welding- What position is 3F?
Show answer
Vertical position for fillet welding
FlashKeepers