FlashKeepers

Plumbing Licensing · Plumbing · Professional Certifications

Plumbing Gas Piping and Water Heaters

Gas pipe sizing, venting, water heater types, safety devices and installation rules.

About this set

39 basic cards for Plumbing Plumbing Licensing. It opens with "What materials are approved for natural gas piping installations?" and "What is the maximum spacing between supports for 1/2 inch diameter gas piping?". More Professional Certifications decks are listed below.

39 cards · basic cards · AI-written, checked twice. Edit anything.

Study this set free Look inside first Get FlashKeepers for iPhone

Opens in your browser, no account. Get the iPhone and iPad app · Android app

What materials are approved for natural gas piping installations?
Show answerCSST, copper, black iron pipe, and PVC for outdoor use only
What is the maximum spacing between supports for 1/2 inch diameter gas piping?
Show answer6 feet
What does CSST stand for?
Show answerCorrugated Stainless Steel Tubing
What is the typical supply pressure for natural gas to residential appliances?
Show answer0.5 psi or less
What minimum test pressure and duration must gas piping withstand?
Show answer1.5 times the maximum operating pressure (minimum 1.5 psi) for at least 10 minutes
Can rigid copper gas tubing be field-bent during installation?
Show answerNo, all bends must be manufactured before installation
What does a pressure regulator do in a gas piping system?
Show answerReduces high-pressure supply gas to the lower pressure required by appliances
What clearance from combustibles is required around a gas water heater?
Show answer3 to 6 inches, depending on appliance specifications and local code
What is natural draft venting?
Show answerVenting that relies on the buoyancy of hot exhaust gases to rise and exit without mechanical assistance
What is power vent venting?
Show answerVenting that uses an electric fan to force exhaust gases up and out through the vent
What is the minimum slope for a natural draft water heater vent?
Show answer1/4 inch rise per 12 inches of horizontal run
Can a water heater vent diameter decrease as it rises?
Show answerNo, the vent must maintain the same size or increase, never decrease
Where must a water heater vent terminate?
Show answerAbove the roof line or through an exterior wall, with clearance from windows and doors
What is a tankless water heater?
Show answerAn on-demand water heater that heats water as it flows through, without storing heated water
What are the main advantages of tankless water heaters?
Show answerHigher energy efficiency, unlimited hot water supply, and compact size

24 more cards in the app

Study this set free