Straight razor shaving technique, blade safety, and facial hair design concepts tested on barbering state board exams.
About this set
35 basic cards for State Board Cosmetology. It opens with "What is the sharp cutting part of a straight razor called?" and "What is the thick, unsharpened back edge of a straight razor blade called?". Study it alongside the other State Board sets below.
35 cards · basic cards · AI-written, checked twice. Edit anything.
- What is the sharp cutting part of a straight razor called?
Show answer
The blade (edge)
- What is the thick, unsharpened back edge of a straight razor blade called?
Show answer
The spine (back)
- What is the narrow front tip of a straight razor blade called?
Show answer
The toe
- What is the wider back portion of a straight razor blade, nearest the handle, called?
Show answer
The heel
- What is the metal piece connecting the blade to the handle of a straight razor called?
Show answer
The shank
- What is the extension at the end of a straight razor's shank, used to open and close the razor, called?
Show answer
The tang
- What are the two halves of a straight razor's handle that fold over and protect the blade called?
Show answer
The scales
- What type of razor holds a replaceable, disposable blade instead of requiring honing and stropping?
Show answer
A shavette
- What is the process of sharpening a razor's edge on a hone stone called?
Show answer
Honing
- What is the process of aligning and polishing a razor's edge on a leather strop called?
Show answer
Stropping
- A straight razor should be ____ before every shave to realign its edge.
Show answer
stropped
- Does stropping sharpen a dull razor blade?
Show answer
No, stropping only aligns and polishes the existing edge; it does not sharpen
- How often does a straight razor typically need honing compared to stropping?
Show answer
Much less often; honing is occasional, while stropping is done before every shave
- What is the standard angle between a straight razor's blade and the skin during shaving?
Show answer
About 30 degrees
- What is a razor stroke called when the blade's cutting edge leads in the direction the fingers point?
Show answer
A freehand stroke