RF exposure limits and FCC Part 97 regulatory concepts for amateur radio station operation.
28 cards · basic cards · AI-written, checked twice. Edit anything.
- What is FCC Part 97?
Show answer
The federal regulation governing amateur radio service in the United States
- Name the three amateur radio license classes in the United States.
Show answer
Technician, General, and Extra
- What is the FCC RF exposure limit for controlled environments at amateur radio stations?
Show answer
5 milliwatts per square centimeter, averaged over 6 minutes
- What RF exposure limit applies to the general public in areas they might access?
Show answer
1 milliwatt per square centimeter, averaged over 30 minutes (uncontrolled exposure)
- Below what frequency does the FCC consider there to be no RF hazard?
Show answer
300 kilohertz (300 kHz)
- What is duty cycle in the context of RF safety?
Show answer
The percentage of time a transmitter is actually transmitting compared to total time
- What must be posted at an amateur radio station transmitting RF fields that exceed exposure limits?
Show answer
An RF hazard warning sign or label
- What does FCC Part 97.113 prohibit?
Show answer
Business communications and transmissions for commercial purposes
- How often must an amateur radio operator transmit their call sign?
Show answer
At least once every 10 minutes during a communication and at the end of communication
- What is the primary responsibility of an amateur radio operator regarding harmful interference?
Show answer
To cease transmission immediately and take steps to eliminate interference when notified
- What frequency range constitutes the 2-meter amateur band?
Show answer
144 to 148 megahertz (144-148 MHz)
- What frequency range constitutes the 70-centimeter amateur band?
Show answer
420 to 450 megahertz (420-450 MHz)
- Must amateur radio equipment be type accepted by the FCC?
Show answer
Yes, transmitting equipment must be type accepted or FCC certified to be legally operated
- What is a repeater in amateur radio?
Show answer
A station that receives a signal on one frequency and retransmits it on another frequency
- What is a standard offset used for 2-meter repeaters in North America?
Show answer
Plus or minus 600 kilohertz from the input frequency