Primer, sheen, patching, taping, mudding, sanding, brush and roller technique.
41 cards · basic cards · AI-written, checked twice. Edit anything.
- What is primer and what does it do?
Show answer
A base coat that seals surfaces and creates a better surface for paint adhesion- When should you use primer before painting?
Show answer
On bare wood, stained surfaces, glossy surfaces, new drywall, or any surface the paint may not stick to well- What does primer do when applied over stains?
Show answer
Seals and blocks the stain so it does not bleed through the top coat- Why prime wood before painting?
Show answer
Wood absorbs moisture and paint unevenly; primer seals it for uniform color and finish- What is the main difference between primer and paint?
Show answer
Primer is designed for adhesion and sealing; paint provides color and durability- What does flat or matte sheen look like?
Show answer
No shine; absorbs light and hides surface imperfections- What is eggshell sheen?
Show answer
A low sheen with minimal shine, like the surface of an eggshell; hides most imperfections while being washable- What is satin sheen?
Show answer
A smooth, velvety finish with moderate shine, more durable and easier to clean than eggshell- When would you use semi-gloss sheen?
Show answer
On trim, doors, bathrooms, and kitchen cabinets where durability and water resistance are needed- What is gloss sheen used for?
Show answer
High-shine finish on trim, doors, and cabinets; very durable and easy to clean but shows imperfections- What is the purpose of drywall tape?
Show answer
To cover and reinforce drywall seams so they do not crack- What is the difference between mesh tape and paper tape?
Show answer
Mesh tape is self-adhesive and easier for beginners; paper tape requires embedding in mud and gives stronger results- How do you embed drywall tape in joint compound?
Show answer
Apply a thin layer of mud to the seam, press the tape into it, then smooth another layer over the top- What is joint compound?
Show answer
A plaster-like material, also called mud, used to cover drywall seams and patch holes- How do you patch a small hole in drywall?
Show answer
Apply spackling compound or lightweight joint compound with a putty knife, smooth it flush, let dry, sand smooth
FlashKeepers